The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground
For a stable, worry-free ride with any rear wheel-mounted trainer. Product Features - For a stable, worry-free ride with any rear wheel-mounted trainer. - Unique 3-level design lets you select the level of difficulty. - Stack two blocks to simulate climbing workouts. Three different positions to raise your front wheel and simulate hill climbs - 2.1 inches (5.3 cm) - 2.7 inches (6.8 cm) - 3.1 inches (7.9 cm)
$54.00 - $60.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Strava and Zwift, or paired to your bike computer. It's weatherproof, small with a low drag profile, and comes with a rubber band and zip tie mounts. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and GPS devices. - No tangled wires on your bike to connect the sensor to your device. - Provides accurate speed data during your ride - Provides accurate cadence data during your ride - BlueSC comes with a rubber band mount and zip tie mount. - The Blue SC sensor will fit with most bikes and frame sizes
Stick to your fitness plan year round with the help of the Saris Mag+ trainer. It is the perfect way to keep your legs warm when it's cold, dry when it's wet, and safe when it's too dark to ride outside. With this turbo trainer, it's easy to turn your bike into your go-to calorie burner — no matter the season. Simply attach the handlebar-mounted shifter to change resistance during your workout without having to leave your bike. Want to train with Zwift or Rouvy? All you need is a speed sensor. Visit our setup guide to learn how to get started. - Magnetic resistance unit provides a quiet and frictionless ride. - Linear resistance boosts workout intensity to match each pedal stroke and gear click. - Mag+ comes with convenient, adjustable handlebar-mounted shifter. - Compatible with Zwift and other indoor cycling apps
A Killer Training Combo What happens when you pair a speed sensor with the #1 selling bike trainer in the USA? You get a combo that’s ready for any virtual—or non-virtual—training ride. It’s the ideal setup for budget-conscious athletes looking to join fun, virtual communities, like Rouvy and Zwift, without a traditional smart trainer. Simply install the magnetless speed sensor on the rear wheel of your bike, mount your bike to the solid Fluid2 trainer with our innovative club knob, connect to your virtual training app of choice via Bluetooth or ANT+, and voilà! - you’re ready to sweat. Product Features - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Included speed sensor connects you with Rouvy, Zwift and other indoor cycling apps. - ANT+ USB and BlueGiga USB sold separately. - Includes one month subscription to Rouvy virtual training app In the box: - Fluid² Smart Equipped Bike Trainer - Dual-band magnetless speed sensor - Fluid² is the best-selling trainer in the USA. - Fluid resistance unit creates optimal road-like feel. - Fluid resistance unit provides a quiet and consistent ride. - Noise level at 20 mph is super quiet 64-68 decibels. - Large, individually precision-balanced flywheel allows for improved road-like feel. - Self-cooling mechanisms including a patented fan design keeps the unit performing better, longer. - Eccentric leveling feet allow for easy adjustment on uneven surfaces. - Comes on the foldable Classic frame with spring loaded, bolt-action lever. - Precision-machined alloy roller reduces tire wear and slippage. - Features clutch knob for perfect roller-to-tire tension each ride. - 2" resistance unit roller allows for 650b, 700c, 26", 27" and 29" wheel sizes – up to a 2.0 tire. - This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm and 135mm. - Trainer tire recommended. - Compatible with indoor cycling apps. - Trainer is tested to the combined weight (rider and bike) of 300 lbs. - Optional thru-axle adapter available for 142x12mm and 148x12mm bikes. - ANT+ USB and BlueGiga USB sold separately. - Formerly branded as CycleOps Fluid² Smart Equipped
For year-round training and a fully interactive indoor cycling experience, the Flow Smart trainer offers everything you need. Its wheel-on design allows for easy setup and storage. It even connects to your favorite apps, such as Zwift, Tacx, and TrainerRoad. - Wheel-on design sets up with two easy clicks and securely locks in place - Measures speed, power, and cadence - Virtually silent flywheel lets you ride without disturbing others - Works with popular third-party training apps such as Zwift and Tacx - Train with realistically simulated inclines up to a 7% gradient FEATURES Type of trainer: Interactive Smart trainer with electric brake Magnets: 6 Magnets Transmission: Roller, 30mm Electrical requirements: 110-240 Volt Power indicator: None Connection indicator (ANT/BT): None Firmware upgradable: Yes Suitable bikes: Race, Tri, & MTB; if necessary with axle skewer; 29" wheel with Tacx trainer tire Suitable axles: Width of rear fork: Race 130mm, MTB 135mm. Adapters for other widths also available Supplied with: Front wheel support, Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS Max. power (40 km/h): 800 Watt Max. incline: 6% Simulation of descent: No Max. torque: 15.3 Nm Max. brake force: 45 N Flywheel: 1.6 kg Mass inertia: 11.8kg (26.0 lbs) Calibration: Spin down Footprint (lxw): 675 × 650 mm (26.6 × 25.6 in) Height: 410 mm (16.1 in) Dimensions when folded: 565 × 410 × 245 mm (22.2 × 16.1 × 9.65 in) Weight: 9.41 kg (20.7 lbs) Article number: T2240 DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Tablet, Stand alone Output: Cadence , Power , Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error Tolerance: <5%
Whether you want to attend a group ride in Zwift, climb the Dolomites in Rouvy, or simply need a sweat session, the M2 smart trainer can get you there. All you need is your bike, the M2, your favorite virtual training software, and device of choice. This do-it-all, smart bike trainer is capable of replicating any workout thrown its way, up to 1500 watts and a 15% climbing grade. Simply connect to your virtual training application of choice via integrated dual-band ANT+ FE-C and Bluetooth, and let the M2’s electromagnetic response system do the rest. And, thanks to integrated speed, cadence, and power data, you can track and record performance data without extra external sensors. Plus, our innovative clutch knob ensures perfect tire-to roller connection for every single ride. - Noise level is a quiet 69 decibels at 20 mph. - PowerTuned using PowerTap technology for accurate power readings up to +/- 5%. - This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm, and 135mm. - Optional thru-axle adapter available for 142x12mm and 148x12mm. - Integrated dual ANT+ FE-C and Bluetooth standards. - Fast response electromagnetic resistance ensures most responsive resistance and maximum power available. - Robust design is capable of handling up to 1500 watts at 20 mph and can simulate up to a 15% climbing grade. - Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2. - Internally integrated speed, cadence, and power data eliminates the need for extra external sensors. - LED indicator lights communicate connectivity and more. - Internal cooling system moves air through the trainer to keep it cool while active thermal sensors ensure accurate performance data even during the hardest of workouts. - Comes on the Saris foldable Classic frame with spring loaded, bolt-action lever. - Features clutch knob for perfect roller to tire tension each ride. - 2" resistance unit roller allows for 650b, 700c, 26", 27", and 29" - up to a 2.0-inch tire. - Does not fit 650c wheel sizes, nor all 29er tires. - Precision-machined alloy roller reduces tire wear and slippage. - Eccentric leveling feet allow for easy adjustment on uneven surfaces. - Trainer tire recommended - Compatible with a wide variety of devices and virtual training applications, including Rouvy, Zwift, TrainerRoad, and many more. Contact us with questions about compatibility with other software. - Over the air (OTA) firmware updates via Bluetooth devices ensures the M2 is up to date. - Some assembly required - All of our trainers are tested to the combined weight (rider and bike) of 300 lbs. - ANT+ and BlueGiga USB dongles sold separately - Not compatible with CycleOps- or Saris-branded 20/24" wheel adapter
The KICKR CORE is the latest in Wahoo's line of smart indoor bike trainers. It delivers a realistic, accurate, and quiet indoor training experience by using the proven flywheel technology and advanced algorithms of Wahoo's legendary indoor bike trainers. The KICKR CORE indoor trainer is built with the durabilty to withstand all of your indoor training sessions and no other brand of smart trainers has more apps and software training options, including Zwift and Trainer Road. The Core also features built-in cadence measurement, without the need of an external sensor. PLEASE NOTE: Some assembly is required. The KICKR CORE does not include a cassette or wheel block. These items can be purchased separately. - Wahoo's KICKR CLIMB indoor grade simulator was designed in conjunction with the KICKR smart trainers to deliver an unmatched indoor training experience when combined. - KICKR HEADWIND was designed to deliver innovative climate control to your indoor training experience. - The new KICKR features 12x142 and 12x148 thru axle compatibility in addition to standard 130/135mm quick release. Click to find out if your bike is compatible. - Enhanced power accuracy to provide accurate power measurement and generate up to 1800W. - Maximum percent grade adjusts to simulate up to a 16-degree incline. - Visual confirmation that KICKR CORE is powered, connected and transmitting via Bluetooth and/or ANT+. - ANT+ and Bluetooth capabilities allow it to connect to both smartphones and GPS devices simultaneously or separately. An ANT+ FE-C connection allows the KICKR CORE to be controlled from any FE-C enabled device or application. - Robust steel construction ensures the KICKR CORE stays in place while you crank out the watts and stands up to years of heavy use. - When connected to your device, it automatically sets your resistance via your favorite app or software. - The KICKR flywheel is innovative and proven technology emulates the power and inertia experienced during outdoor riding. It provides the most realistic ride feel especially when using virtual riding/training platforms like Zwift and TrainerRoad. - Get these vital cycling metrics on your indoor ride. - Works with popular training apps such as Zwift, The Sufferfest, Fulgaz and TrainerRoad. - Compatible with a third party power meter.
Page 1 of 1