Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Cables

$47.00
Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation.
- Dura-Ace grade SLR-EV Road brake cable set
- Stainless steel for anti-rust protection
- Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance
- Pre-lubed with special polymer compatible grease

$27.00
- 1.2 mm x 2100 mm (1 pc.)
- 1.2 mm x 1800 mm (1 pc.)
- OPTISLICK
- Stainless steel
- Outer cap with short tongue for ST (2 pcs.)
- SIS-SP40 outer caps (3 pcs.)
- SIS-SP40 sealed outer caps (1 pc.)
- Inner end caps (2 pcs.)
- OT-SP41 1700 mm
- OT-RS900 (1 pc.)

$38.00
These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation.
Includes:
- 1400mm x 5mm housing x 1
- 800mm x 5mm housing x 1
- 2050mm x 1.6mm cable x 1
- 1000mm x 1.6mm cable x 1

$120.00
- Brake casing has internal lining and external plastic coating
- Derailleur casing is compressionless with internal lining and external plastic coating

$176.00
- Hydraulic Disc Brake Hose Fitting Kit
- Includes 5 threaded hosebarbs, 5 red comp fittings, 1 T8 Torx
- Compatible with Stealthamajig and standard levers

$15.00
- For either front or rear shifter
- Road & MTB compatible
- 1.1 polished stainless steel cable

$14.00
Cable is coated with a durable low-friction polymer.
- Dupont Tefzel coating is more durable than previous coated cables
- Length: 2300mm
- Diameter: 1.2
- Cable Head: Shimano/SRAM
- Double Ended: No

$15.29
Alleviate brake cable alignment and tangles with Origin-8's Fork Mount Cable Hanger. Made from forged aluminum, it mounts easily to the hole in your bike's fork crown.
- Forged aluminum construction
- Mounts to most frame or fork mounting holes
- Great for tricky cantilever brake setups
- Lightweight design
- Front for fork mount / Rear for frame mount

$15.29
- Great for center-pull cantilever brake setups
- Fits threadless fork steerer tubes
- Includes barrel adjuster
- 24mm cable stop drop
- AL6061-T6 alloy construction

$5.99
Origin-8 Plastic Cable Guides provide a quick, easy, clean routing system for your cables. Great for disc brake lines or for rear brake cable housing guides, they mount to any frame type. The plastic guide will not damage the frame and no need to worry about corrosion.
- Zip ties to frame
- 2 per package
- Black

$15.29
Alleviate brake cable alignment and tangles with Origin-8's Rear-Mount Cable Hanger. Made from forged aluminum, it mounts to most brake bridge mounting holes and is great for solving tricky cantilever brake set up problems.
- Forged aluminum construction
- Mounts to most frame mounting holes
- Great for tricky cantilever brake setups
- Lightweight design

$13.59
- Stainless steel die-pulled and polished superslick brake cable with electrolysis coating
- Electrolysis coating offers an ultra-smooth surface finish that greatly reduces friction for outstanding braking performance
- SRAM/Shimano compatible head
- Extra-long 2800mm cable length
- Use: Front or Rear
- Length: 2800mm
- Diameter: 1.5mm
- Style: Road

$91.99
Jagwire Elite Link housing is the ultimate combination of durability and attention-grabbing looks. Available in six eye-catching colors, they're designed to improve any bike's performance and appearance.
The housing uses a series of aluminum links to provide a compressionless system for precise shifting performance. But unlike typical compressionless housing, its flexibility allows for tight bends without kinking. It's also lighter than traditional linear strand shift housing while being more durable. Combine these benefits with Elite, ultra-slick polished cables and Slick-Lube liners, and you've got the best of performance and style.
- Precise, compressionless shifting performance combined with extreme flexibility
- Each kit comes with links pre-installed on housing segments making setup quick and simple
- Ultra-slick polished inner cables minimize system friction
- Durable aluminum housing won't kink or rust and is 20% lighter than typical shift housing
- Includes enough housing and end caps to reach a rear derailleur or internally geared hub on a typical frame
- Bikes with extra-large frames or unusual cable routing may need additional links and/or liners; service parts are available separately

$37.99
Jagwire Elite Link housing is the ultimate combination of durability and attention-grabbing looks. Available in six eye-catching colors, they're designed to improve any bike's performance and appearance.
The housing uses a series of aluminum links to provide a compressionless system for precise shifting performance. But unlike typical compressionless housing, its flexibility allows for tight bends without kinking. It's also lighter than traditional linear strand shift housing while being more durable. Combine these benefits with Elite, ultra-slick polished cables and Slick-Lube liners, and you've got the best of performance and style.
- Precise, compressionless shifting performance combined with extreme flexibility
- Each kit comes with links pre-installed on housing segments making setup quick and simple
- Ultra-slick polished inner cables minimize system friction
- Durable aluminum housing won't kink or rust and is 20% lighter than typical shift housing
- Includes enough housing and end caps to reach a rear derailleur or internally geared hub on a typical frame
- Bikes with extra-large frames or unusual cable routing may need additional links and/or liners; service parts are available separately

$24.99
Jagwire 1x Pro Shift kits deliver enhanced performance and style to any bike with a single-chainring drivetrain. A Pro Polished Slick Stainless cable and the Slick-Lube housing liner provide an upgrade over OEM cable systems, with enhanced shifting precision and long-lasting performance.
The 1x Pro Shift kit is designed to work with nearly all frames and 1x shifting systems, including most internally-geared hubs. And with small parts included for both road and mountain systems, this kit is quick and easy to install. 1x Pro Shift kits are offered in 10 colors to match Jagwire's Pro Brake and Hydraulic Hose kits.
- The Pro Polished Slick cable combined with a Slick-Lube liner offer enhanced shifting precision and long-lasting performance
- All parts are included for a complete 1x shift cable and housing installation on either a road or a mountain bike
- The kit contains an extra-long inner cable and ample housing for large frames or a continuous housing run
- 1x kits are perfect for bikes with only a rear derailleur or an internally geared hub
- Black kits contain gloss black housing with silver logos; Stealth Black kits have matte black housing featuring black logos
What's Included:
- 1x 2200mm LEX-SL Shift Housing
- 1x 2800mm Pro Polished Slick Shift Inner Cable
- 2x Sealed Alloy End Caps
- 4x Lined Alloy End Caps
- 1x Hooded Alloy End Cap
- 1x Cable Tip
- 1x 5G Tube Top
- 3x Cable Donuts
- 1x Rotating Hook

$17.99
A great replacement for OE cables and a perfect way to bring style to a bike, the 1x Sport Shift kits make it easy. They come with a weld-cut single-ended Slick Stainless cable for easy installation with modern SRAM and Shimano shifters. The included housing uses our Slick-Lube liners to reduce friction, providing shifting precision and long-lasting performance. This kit is designed for use on bikes with a 1x drivetrain with a rear derailleur or internally geared hub.
- Single-ended shift cable is compatible with SRAM and Shimano shift levers for both road or mountain bikes
- Sport Slick Stainless cable combines with a Slick-Lube housing liner to offer dependable shifting performance and durability
- Includes everything needed for a complete shift cable and housing replacement for a rear derailleur or internally geared hub
- OEM-level cables and housing with high-quality small parts

$24.99
A great replacement for OE cables and a perfect way to bring style to a bike, our 2x Sport Shift kits make it easy. They come with weld-cut single-ended Slick Stainless cables for easy installation with modern SRAM and Shimano shifters. The included housing uses our Slick-Lube liners to reduce friction, providing shifting precision and long-lasting performance. This 2x kit is designed for use on bikes with both front and rear derailleurs.
- Single-ended shift cables are compatible with SRAM and Shimano shift levers for both road or mountain bikes
- Sport Slick Stainless cables combined with Slick-Lube liners offer dependable shifting performance and durability
- Includes everything needed for a complete shift cable and housing replacement for front and rear derailleurs
- OEM-level cables and housing with high-quality small parts

$11.99
Jagwire Basics Brake Cable Kits have everything needed to replace the brake cables and housing for a typical bike with rim brakes.
- Double-ended cables are compatible with both mountain and road brakes
- Lined CEX brake housing
- Slick galvanized inner cables are pre-stretched and resist corrosion
- Includes everything needed for a complete brake cable and housing replacement on most bikes with rim brakes

$4.49
These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head.
- Galvanized
- Pre-stretched
- Double ended
- Cable Head: Shimano/SRAM, Huret/Simplex
- Defined Color: Silver
- Diameter: 1.2mm
- Double Ended: Yes
- Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters
Page 1 of 3
Next page