Skip to main content

Fall/Winter Hours: Mon-Sat 10am-6pm, Sun 12pm-5pm

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Packs/Racks/Baskets

$29.95
The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads
$71.99
Wald's medium size twin rear carrier basket is a durable way to carry heavier loads. With mounting points at both the seat stays and near the rear axle, you can haul more groceries, gear, or anything else you need to with less impact on your bicycle's handling. By placing the bulk of your load around the rear wheel, you increase your bicycle's stability. This allows you to carry 1-2 small grocery bags in each side basket with greater confidence and ease. - Made in U.S.A. (Maysville, KY) - These are 1-piece twin carrier baskets designed to fit on rear of the bicycle - Dimensions: 6.5 x 13.5 x 10 inches; tapers to 4.5 x 11.5 inches at the bottom - Rack is 5" by 13" long - Baskets can be mounted to frame eyelets or use the supplied mounting bracket - Legs have two axle mounting holes and one small hole to mount to the eyelet - 520 has a Zinc Plated Finish; 520GB has a Black Powder Coat Finish - Complete basket with fittings weighs 5.3 lbs.
$45.99
The Wald 582 sets the standard for ingenuity when it comes to rear baskets. Mounting to the side of many rear racks, this nimble basket is the perfect size for packing 1-2 bags of groceries while balancing your load. When not in use, the base of the basket pivots up allowing the side walls to collapse. A simple clamp at the top keeps the basket out of your way when not in use. - Made in U.S.A. (Maysville, KY) - Baskets clamp to most rear racks up to 1/2" diameter - When not in use the base of the basket pivots up allowing the side walls to collapse making the collapsed basket 1" thick - A simple clamp at the top keeps the basket out of your way when collapsed - Extended basket is 12 3/4" front to back x 7 1/4" side to side x 8 1/2" deep - 582 Baskets have a Zinc Plated Finish; 582BL and 582WH Baskets have a Powder Coat Finish - Complete basket weighs 2.8 lbs.
$62.95
A sturdy handlebar-mounted metal basket for shopping trips, quick jaunts around town. New QuickClick Handlebar Mount (Fixer 3e) allows installation on eBikes to make attachment and removal a breeze. - Capacity: 16L/975 Ci - Weight: 1370G/3.02 Lb - Size: 35x26x25cm/13.8”x10.2”x9.8” - Attachment: QuickClick Handlebar Mount (Fixer 3e) Fits 25.4mm and 31.8mm handlebars (shims included)
$69.95
A clever handlebar bag that converts to a waist pack. Great for cameras, cell phones and other essentials you want close at hand. Rain cover included. - Divided main compartment, Two side zip pockets - Material: 1800 denier nylon - Max Load: 5kg / 11lb - Fully padded - Waist Belt, Carry handle, Rain cover, Yellow lining - QuickClick Handlebar Mount (Fixer 8) - Fits 25.4, 28.6 & 31.8mm handlebars - Size: 22 x 18 x 13cm / 8.7" x 7.1" x 5.1" - Weight: 334g / 11.78oz
$52.95
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - 625g - 55lb weight capacity
$64.95
- Specifically designed for 29" mountain bikes and larger volume 700C wheels - Compatible with bike frames equipped with disc brakes - Tubular aluminum rear rack for loaded touring - MTX 2.0 QuickTrack compatible with all MTX Trunk Bags or MTX rear baskets - 6061 T-6 hollow aluminum - 55lb weight capacity - 680g
$69.95
Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.
$54.95
Need more carrying capacity for running errands? Then check out Topeak's Rear Basket. It easily attaches to a Topeak QuickTrack rear rack (sold separately) and holds groceries, work clothes and anything else you need to transport. And, its handle makes it extremely portable.
$114.95
Topeak's MTX TrunkBag DX boasts an expandable main compartment to carry all the gear you need. It's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, taillight clip and top elastic straps. There are even reflective strips for safety. Plus, Topeak's ingenious MTX System makes it a snap to attach it to your Topeak MTX QuickTrack rack (sold separately). - Capacity 12.3 L / 750 ci - Compartments 1 Divided main compartmetn, two side zippered pockets, Multi-expanding top compartment - Added Features: Water bottle holder Shoulder strap Carrying handle Elastic top bungees 3M reflective strip Safety light clip Optional rain cover - Size (L x W x H): 36 x 25 x 21.5-29 cm / 14.2” x 9.8” x 8.5”~11.4” - Weight: 985 g / 2.17 lb
$19.95
Omni QuickTrack Adapter attaches to a standard rear rack or Racktime* system platform allowing the use of popular Topeak TrunkBags and rear baskets. Adjustable mounting brackets fit rear rack widths from 90mm to 120mm with 10mm to 12mm rack tube dimensions. - Attachments: Rear rack deck - Material: Engineering grade polymer - Max Load: Limited to rack max loading rating - Size: 32 x 9.4 x 6.1cm - Weight: 230g / 8.11oz Compatibility - Fits rear rack without top plate and spring clip, - Rear rack width 90mm - 120mm, - Rack tubes, 10mm to 12mm diameter - Compatible with Topeak MTX / RX TrunkBags and MTX rear baskets *Racktime is a registered trademark of tubus carrier systems GmbH.
$80.00
Whether it‚ a picnic in the park or an epic, multi-day ride in the mountains, we believe good storage equals good adventuring. Enter our versatile and tough Coolcave pannier. A 19-liter open pannier in rigid plastic, our Coolcave is perfect for carrying everyday essentials, purchases, or camping gear on bike commutes or trips in the countryside. Easy to clip on and off so you can take the pannier and its contents with you. Adjustable Isofix mountings allow for secure attachment on most bike racks. - 19 L cargo capacity. - KlickFix mounting system. - Made with 50% recycled plastic. - Cargo net included. - Compatible with Specialized/Fjällräven Cave Pack, Cave Pack Tote, and Cave Lid Pack.
$100.00
The Globe Front Rack bolts directly to the two mounts on the head tube to create a tough-as-nails platform for carrying whatever your heart desires. By mounting directly to the bike frame, heavy loads can be distributed with minimal effect on handling and stability. It's also compatible with the Globe Haul's front and rear pannier adapters, allowing you to carry 5+ full grocery bags. The T-channel rail material means you can bolt on additional accessories to the sides to further customize your setup. It also accepts MIK accessories, like the MIK adapter & Turbo Basket, for fast and secure installation. - Designed for frictionless compatibility with Haul ST and Haul LT. - MIK accessory-compatible. - T-channel rail construction. - 20kg (44lb) load capacity. 30cm length, 32cm width - Installation requires tools (not included).
$100.00
These fork-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low position maximizes handling stability, and this front option leaves the rear rack open for carrying passengers or even more cargo options. *Third-party panniers are not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two adapters (one for each side of the fork) and all required hardware. - 8kg (18lb) load capacity per side. - All tools required for assembly included with the purchase of the Haul ST or Haul LT bike
$69.99 $100.00 30% Off
These rear rack-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low mounting position opens the top rack platform for other accessories like the Rack Customization Kit or MIK adapter. *Third-party panniers not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and up to 2 pairs on Haul LT* - *Not compatible with Globe Pegs due to shared mounting location. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two pannier adapters (one for each side of the rack) and all required hardware. - 8kg (18lb) load capacity per side. - Additional tools required for rear installation (not included).
$50.00
All Globe racks are made with T-channel aluminum rails to maximize versatility, capability, and creativity. Many of our Globe-branded accessories mount directly to these channels, but they will also accept just about anything you can imagine bolting to them. To help unlock that possibility, the Rack Customization Kit provides an assortment of bolts and T-nuts compatible with our front and rear rack rails. Just BYO milk carton, wine crate, cooler, you name it! Two T-channel rail pieces can be used to increase the effective dimensions of your rack to provide a more secure platform for large or awkward gear. - Compatible with Globe Haul ST and Haul LT rear racks, and Globe Front Rack. - Includes two rack extension rails, eight T-nuts, and 12 assorted bolts. - All tools required for assembly are included with the purchase of the Haul ST or Haul LT bike.
$25.00
So you like to keep your rig running minimalist but practical? Maybe you prefer to tape a spare tube and CO2 to your frame to keep the profile and weight low? The Bandit is the best of both worlds in terms of simplicity and utility for mountain riders. Its compact form bolts under your SWAT-compatible saddle and features a simple Velcro strap with individual compartments for tube, CO2, and tire lever. One rip of the strap and you’re in, with easy to access everything you need to fix a flat in the middle of a race, when time is of the essence. - Tough, lightweight, water-resistant Velcro strap. - Uniquely designed to bolt directly under a saddle with SWAT-compatible mounts. - Individual compartments for a CO2 valve head, mountain tube, two-sided tire lever (included), and a 25g CO2 cartridge (not included) for compact and secure storage. - Tube, CO2 cartridge, and nozzle not included.
$79.99 - $120.00 $120.00 Up to 33% Off
The Tailwind aerodynamic panniers blend form with function, reducing drag and battery consumption by up to 6% when tested against competitors. Their low-bulk, clean-lined design delivers increased stability with a sleek aesthetic, creating a modern storage solution that lets you go further, faster, without compromising on what you carry. - 17 L capacity for all your gear, whether you're going downtown or way out of town. - Approx. dimensions (mm): 400 x 330 x 142mm (height/width/depth). - Klickfix mounting system lets you load the bags on and off your bike quickly for easy transitions, freeing up the top of the rack for additional carrying. - Compatible with all standard racks and all racks on Specialized bikes. - Sleek, water-resistant design sheds rain so your stuff stays dry when the weather gets nasty. - Unique right- and left-sided design delivers optimal aerodynamics for increased efficiency. - Internal laptop sleeve carries your computer snug and safe (laptops up to 17" screen). - 360-degree reflective graphics help drivers see you coming. - Freestanding shape for accessible loading and unloading.
$30.00
Add a rack to your frame, even if you don’t have rack mounts. This innovative design allows a standard rack to be bolted directly to the thru-axle for a clean and simple look. It's made from lightweight aluminum to keep weight down and durability high, and it features threads inside of the axle to install the lower mounting bolts. - 12x148mm axle fits all carbon and alloy Specialized mountain bike frames with Boost rear hub spacing.
$20.99
Perfectly utilitarian, but also easier on the eyes than most racks thanks to its curving lines. - Tubular aluminum construction - Bracket for rear light - All hardware included - Rack measures 36x14x36 - 25kg. weight limit - Available in matte silver and black Note the current design of the upper hardware is better suited to attach to frame braze-ons that are embedded in the side of the seatstays and less friendly to braze-ons that sit on top of the seatstays and align perpendicular to the bike.
$32.00
Salsa's Post-Lock is a rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Stainless steel pivot and bolt - Available for 27.2 and 31.6mm diameter seatposts - Black anodized with laser-etched logo - 44g for a 31.6mm collar - Not for use on carbon seatposts - Note: Post-Locks do not have a lip like Salsa's Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp.
$11.99
Our Seatpost Clamps with rack mounts provide a stable spot to mount your rear rack stays to on bikes without seatstay braze-ons. Very handy. Also great for light mounts, a saddlebag stabilizer, or anything else you problem solving people tend to dream up. Unless you’re thinking about towing a jet ski with it. Let’s be reasonable. Tech Details - Available in 31.8 mm and 34.9 mm diameters - Alloy clamp - Stainless steel bolt - Threaded to accept standard M5 bolts
$28.99 - $31.99
- Robust 420D Nylon construction with strong zipper - Universal saddle compatibility thanks to Velcro straps - Reflective trim
$100.00
You need to carry more than water when you ride—but not much. The women's-specific Salida 8 dials you in with just enough room to fit just enough gear. An AirScape backpanel with a center channel offers supreme airflow and allows for dynamic body movement while keeping things close to your body for exceptional stability—even when things get rowdy. Shoulder straps with rolled edges create soft contact points when your pack is maxed out with gear and snacks. A U-zip main compartment opens wide for easy packing while a separate compartment holds an included 2.5-liter reservoir with direct-zip access. Store an extra layer or a map in the front pocket, or expand it to full capacity to fit a full face helmet for days that call for drops, jumps, and berms—oh my! VARIABLE HELMET CARRY - Includes Osprey's LidLock helmet carry for traditional helmets and front panel upper compression straps for full face helmets. RESERVOIR INCLUDED - Osprey Hydraulics LT 2.5L reservoir keeps you hydrated all day long and stores in a dedicated hydration compartment to protect pack contents from accidental spills. MOUNTAIN BIKE-FOCUSED FEATURES - Multi-pocketed tool organization and large bucket main compartment stores and protects all your essential gear. RIDE STABILITY - Our rolled, soft-edged harness contours to the upper shoulders to keep the pack close to your body and provide stability. FEATURES - Women's-specific fit and sizing - Included Osprey Hydraulics LT 2.5L reservoir by Hydrapak with direct-zip access - Magnetic sternum strap bite valve attachment - Dual upper side compression straps double as a full face helmet carry - Full front panel U-zip to main compartment and tool organization - Front panel shove-it pocket - LidLock helmet attachment - Blinker light attachment - Zippered hipbelt pockets - Zippered scratch-free, heat-embossed slash pocket AIRSCAPE SUSPENSION - Atilon foam framesheet enables dynamic body movement and evenly distrubutes load across the entire backpanel AIRSCAPE BACKPANEL - Mesh-covered extra deep ridged foam with center air channel allows maximum ventilation while keeping the load close to the body BIOSTRETCH HARNESS - Soft breathable spacermesh contact surfaces and die-cut foam ventilation - Rolled, soft-edged harness designed to contour the shoulder providing comfort and stability
$50.00
Quality trumps quantity, and with the Savu 2 less can certainly be more. Reach for this single-bottle lumbar pack for quick laps on your favorite trails. Offering enough storage capacity for ride essentials, such as a spare tube, CO2, multi-tool and snacks. Constructed with high-quality bluesign-approved recycled high-tenacity nylon with a PFC-free DWR coating. Lumbar Carry For riders who require hydration or gear storage while riding, but prefer the off-the-back carry and minimalism provided by lumbar packs. Ride Stability Our bike-specific, angled hipbelt and compression straps provide stability and comfort by keeping the pack close to your body. This is created by a breathable airmesh wrap hipbelt that contours over the hipbone, Osprey's ErgoPull cross-body waist strap closure system that pulls the pack into the lumbar and side compression straps that pull the load close to your body, providing the most comfortable, secure and stable carry. Bottle Carry The perfect solution for stable lumbar carry allows you to access your bottle(s) with ease. For short rides without water, the bottle pockets compress to maintain stability and keep the pack close to your body. Water bottles not included. Sustainable Materials Constructed with PFC-free recycled bluesign-approved nylon; a sustainable build that's tough and durable to endure years of riding. - AirScape backpanel with contouring lumbar wrap provides maximum stability - Easy-access angled padded bottle sleeve - Easily accessible split zippered side compartments with internal tool organization - Blinker light attachment with reflective graphic - Extra thick ridged foam with center air channel for excellent ventilation - Airmesh wrap hipbelt with zippered fabric pockets provide stability and breathability - ErgoPull waist strap closure system allows for proper snug and stable fit
$60.00
The perfect pack for the mountain biking minimalist, the Savu 5 lumbar pack is ideal for quick laps on local singletrack or gravel trails. Two rigid pockets make it easy to pull and replace water bottles as you pedal, while angled hipbelt and compression straps keep the pack close to your body and provide max stability over every trail. (No creep-around here.) Not a two water bottle kind of ride? No problem. Each water bottle sleeve can tuck away when not needed to provide a streamlined pack. Any way you customize it, the main compartment and side hipbelt pockets fit vital flat-fixing tools, a tube, snacks and more. Lumbar Carry For riders who require hydration or gear storage while riding, but prefer the off-the-back carry and minimalism provided by lumbar packs. Ride Stability Our bike-specific, angled hipbelt and compression straps provide stability and comfort by keeping the pack close to your body. This is created by a breathable airmesh wrap hipbelt that contours over the hipbone, Osprey's ErgoPull cross-body waist strap closure system that pulls the pack into the lumbar and side compression straps that pull the load close to your body, providing the most comfortable, secure and stable carry. Bottle Carry The perfect solution for stable lumbar carry allows you to access your bottle(s) with ease. For short rides without water, the bottle pockets compress to maintain stability and keep the pack close to your body. Water bottles not included. Sustainable Materials Constructed with PFC-free recycled bluesign-approved nylon; a sustainable build that's tough and durable to endure years of riding. - AirScape backpanel with contouring lumbar wrap provides maximum stability - Dual snap-in-place or tuck-away water bottle sleeves - Easily accessible split zippered side compartments with internal tool organization - Dual zippered hipbelt pockets - Blinker light attachment with reflective graphic - Easily accessible sunglasses/phone pocket - Extra-thick ridged foam with center air channel for excellent ventilation - Airmesh wrap hipbelt with zippered fabric pockets provide stability and breathability - ErgoPull waist strap closure system allows for proper snug and stable fit
$75.00
Riders looking for a low-profile lumbar pack with integrated hydration need look no further than the Seral 4. This slim waistpack features a 1.5-liter bladder with our updated high-strength magnetic coupling for improved hose management even in rough terrain. the Seral 4 has enough storage capacity for ride essentials, such as a spare tube, CO2 and multi-tool and, of course, snacks. Constructed with high-quality bluesign-approved recycled high-tenacity nylon with a PFC-free DWR coating. Lumbar Carry For riders who require hydration or gear storage while riding, but prefer the off-the-back carry and minimalism provided by lumbar packs. Ride Stability Our bike-specific, angled hipbelt and compression straps provide stability and comfort by keeping the pack close to your body. This is created by a breathable airmesh wrap hipbelt that contours over the hipbone, Osprey's ErgoPull cross-body waist strap closure system that pulls the pack into the lumbar and side compression straps that pull the load close to your body, providing the most comfortable, secure and stable carry. Included Reservoir A dedicated hydration compartment stores an included 1.5 L lumbar reservoir for short to medium rides and compresses for stable carry, while the hose magnet attaches to the bite valve for easy access while riding. Sustainable Materials Constructed with PFC-free recycled bluesign-approved nylon; a sustainable build that's tough and durable to endure years of riding. - AirScape backpanel with contouring lumbar wrap provides maximum stability - Included Osprey Hydraulics 1.5 L lumbar reservoir by Hydrapak - Magnetic hipbelt bite valve attachment - Large zippered main compartment with reservoir sleeve - Main compartment tool organization and internal zippered pocket - Blinker light attachment with reflective graphic - Extra-thick ridged foam with center air channel for excellent ventilation - Airmesh wrap hipbelt with zippered fabric pockets provide stability and breathability - ErgoPull waist strap closure system allows for proper snug and stable fit
$24.99
Featuring fun, kid-friendly artwork in two designs, the handlebar-mounted bag puts items within reach of small hands. The two roomy compartments are perfect for stowing water bottles, gear, clothing, or such important finds as pinecones, seashells, and stones. Keep small riders refreshed and equipped during their outdoor adventures. - Mounts to either crossbar or handlebars - 2 hook-and-loop straps - 2 roomy compartments, 102mm wide each - 80mm thick x 204mm wide x 130mm deep - 10lb maximum weight capacity - Durable, washable cloth construction - Suitable for 12-inch wheels or larger
$54.99
The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit provides everything needed to fix a punctured tire. The kit includes an eight-piece multi-tool, glueless tire patch kit, three tire levers, CO2 inflator & cartridges, and a seat bag to put it all in - 50 cubic inch seat bag with hook-and-loop mounting straps - Three MSW tire levers - Eight-piece flat-pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Glueless patch kit with six patches, sandpaper, instructions - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges
$4.99 - $5.49
Jandd Bicycle Mounted Rack Clamps are for mounting racks with no braze-on points. - Stainless Steel Coated Clamp - Sold as a Pair
Page 1 of 2 Next page