Filter By:
- Cranksets (21)
- Parts & Accessories (16)
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Cranksets
$61.00
Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with Hollowtech II cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: Hollowtech II - BB/Frame Interface: PF30
$64.05
Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
$50.00
The Wheels Manufacturing BB30 Bottom Bracket Adapter for Campagnolo Ultra- Torque Cranks adapts Campagnolo Ultra-Torque cranks to BB30-standard frames. This adapter fits over the installed crank bearing so no bearing removal is required for installation. This adapter is machined from engineering-grade Delrin. - 48g/pr * The design of these adapters includes the use of the Campy bearings factory installed on the crank spindle.
$61.00
Wheels Manufacturing BBRIGHT BB30A and PF30A Adaptor for 24mm Spindle Cranks adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Also adapts Cannondale BB30a and PF30a frames to 24mm spindle cranks (Shimano, FSA, etc.). - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 48g/pr
$64.05
Wheels Manufacturing FSA PF30 Adapter for 24mm Spindle Cranks adapts 24mm Spindle Cranks (Shimano, FSA, etc.) to work on Pressfit 30 frames with FSA's PF30 bottom bracket installed. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. - Machined engineering-grade Delrin - 48g/pr *NOTE: The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
$30.00
• Singlespeed crankset
• Alloy crankarms w/ solid steel chainring
• Square taper interface
• Does not include BB
$39.99
- AL6061-T6 crank with steel chainrings
- 7/8sp compatible
- 177mm Q-factor
- 48.5mm chainline
- Spindle Type: 120 SQR JIS
$39.99
- Steel chainring with forged alloy crank arms and double chainguard
- Compatible with 3/32" chains
- 45mm chainline
- Spindle Type: 118 SQR JIS
$45.99 - $60.00
Shimano Acera FC-M361 cranksets feature sturdy construction, reliable shifting, and replaceable chainrings.
- Spindle Interface type: Square Taper JIS
$60.00
The Shimano FC-M371 crankset for square bottom brackets features a rigid 2-piece construction and Hyperdrive SG-X chainrings.
- Chain guard included
- 9-speed
$124.99
Shimano's Deore Crankset features efficiency and fast shifting to let you make the most out of the trails. Its smooth shifting rhythm maintains speed and acceleration over challenging terrain and provides optimized gear combinations and ratios for trail riding.
Features:
- HOLLOWTECH II Crankset (3x10-speed)
- Efficient power transfer
- HOLLOWTECH II crank arm with 4-arm construction
- Composite chainring
- Close step tooth profile for smooth shifting
- Bottom Bracket compatibility: SM-BB52/BB-MT500-PA
- Chain Line: 50
$104.99
The RS510 crankset features a 4-arm design that's light and stiff, providing high performance on a low budget.
- For 11-speed drivetrains
- Compatible with frames of O.L.D. 135 mm and 410 mm chainstay length
- Affordable and high-end style crankset
$117.99
- Series: SORA
- Crank Construction: 2-piece crank construction
- Bottom Bracket: BB-RS500, BB-RS500-PB
- Chain Line: 43.5
- 9-speed
- Four-arm BCD
$289.99
Shimano Ultegra R8000 crankset.
- Optimized lightweight crank arm design produces excellent power transfer efficiency
- Minimized weight without sacrificing stiffness
- Hollowtech II
- Rider tuned gear performance through various gear combinations
- Possible to choose the best choice for ride
- Redesigned FC for greater frame compatibility
- Wider gear pitch increases clearance between chain and leading teeth to provide compatibility with frames with O.L.D. 135mm and 410mm chain stay length
- Model Number : FC-R8000
- Series: Ultegra
- Crank Construction: Hollowtech II
- Crank Arm Length : 165, 170, 172.5, 175mm
- Bottom Bracket : SM-BBR60/SM-BBR60-PB
- Chain Line: 43.5
- Average Weight: 690 grams (53-39T), 681 grams (52-36T), 674 grams (50-34T), 668 grams (46-36T)
$138.00
- Chainrings Included: Yes
- Number of Chainrings: Single
- Pedal Spindle: 9/16"
- Rings: 42-tooth
$59.00
Lightweight, durable, stiff and designed specifically to work with Bosch and Brose mid-ship motors, SRAM's EX1 crankarms are purpose built for the high-torque E-MTB environment.
- Proven SRAM technologies adapted for the demands of midship-motor E-MTBs
- Compatible with Bosch, Brose and Yamaha bottom bracket interfaces
- Arm Material: Aluminum
- Colors: Black
- Bottom Bracket Interface: ISIS
$197.00
SRAM's Rival 22 performs on par with more expensive cranksets, but at a bargain value. The crankarms are hollow and forged from 6066 aluminum for maximum strength with minimum weight. Because lightness is nothing without toughness, the Rival crankset proudly boasts SRAM's X Glide R chainrings that are specifically designed for use with the Yaw front derailleur. Durability and reliable shifting are your allies with Rival 22.
$74.00 - $94.00
The SRAM SX Eagle Crankset includes Eagle platform styling and features at an entry-level price point. SX Eagle cranks are compatible with all levels with SRAM Eagle drivetrain systems.
- Offers the same chain retention performance as seen in all higher-level Eagle drivetrain cranks
- 32T direct mount X-SYNC 2 steel chainring included
- Aluminum crank arms
- 11/12-speed compatible
- Bottom bracket sold separately
$9.99 - $10.00
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips.
Compatible with:
- Race Face
- Turbine Cinch
- Atlas Cinch
- Atlas (24mm Spindle)
- Turbine (24mm Spindle)
- Aeffect Cinch (175mm length ONLY)
- Most other popular alloy MTB cranks (except some alloy DH cranksets)
$179.99
The Race Face Atlas crank is the burliest alloy CINCH offering; designed to excel across many disciplines including trail, enduro, DH and freeride. Featuring the versatile CINCH interface for interchangeable spiders, limitless ring combinations, a 30mm alloy spindle and compatibility across all relevant frame standards.
- Forged 7050 aluminum alloy arms
- Bracing matrix at the back of the crank arms for added stiffness
- Industry standard 30mm spline interface
- Removable spider offers the ability to convert between existing chainring standards while remaining flexible to future developments
- Interchangeable spindle option of the Cinch system allows you to use the same crankset with 68/73mm and 83mm frames, as well as the RF BMX spindle and spider
- Spindle diameter: 30mm
- Direct mount chainline: 48.5, 55mm (Flipped)
- 2X Cinch spider chainline: 47mm
- Boost 2X Cinch spider chainline:50mm
- Weight: 690g
$9.99 - $10.00
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
Compatible with:
- Race Face
- Next SL Cinch (G3)
- Sixc Cinch
- Chester
- Respond
- Next/Next SL (24mm Spindle)
- Sixc (24mm Spindle)
- Most other popular carbon MTB cranks and assorted alloy DH cranks
$9.99
Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
$7.99
Problem Solvers Crank Arm Fixing Bolts
- 8mm
- Sold as a pair
$19.99
Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for double and triple chainrings, each set includes 5 male/female bolts to securely connect your chain rings to the crank. Available in black and silver, as well as aluminum or steel.
$101.99
Origin-8's Pro Pulsion Alloy Road Crankset is made of light and durable forged aluminum with 53-/39-tooth CNC-machined aluminum chainrings. This fine 9 speed-compatible crankset provides excellent power transfer and smooth shifting.
$60.00
Origin-8's Pro Pulsion Single Speed Crankset is made of light and durable forged aluminum with a 46-tooth stamped-aluminum chainring. It provide excellent stiffness and power transfer.
$23.99
19mm, 48-spline, cold-forged chromoly replacement spindle. Works with most OEM 48-spline cranks. Includes two spindle bolts.
Product Specifications
- Size: 19mm
- Spline: 48-Spline
- Length: 140mm
- Material: Chromoly
- Includes: Spindle and Bolts
- Weight: 9.2oz
Page 1 of 2
Next page