Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Brakes/Levers/Pads

Avid FR-5 Single Brake Lever
$11.00
The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone
Avid CPS Hardware Kit (Stainless Steel)
$14.00
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.
Avid 20R Brake Pads
$14.99
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.
Avid Rim Wrangler 2 Brake Pads (w/cartridge)
$18.00
Bolt on Avid's Rim Wrangler 2 Brake Pads for excellent stopping power. The cartridge design makes it easy to switch pads when they wear out. They're designed for use with linear-pull brakes.
Avid Speed Dial 7 Brake Levers
$18.00 - $31.00
Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible
Avid FR-5 Brake Levers
$21.00
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes
Avid Disc Brake Pads (Juicy/BB7/BB5)
$22.00 - $26.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid Rear 170mm Post Bracket Hardware Kit
$23.00 - $53.00
Avid's Rear 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the back of your bike. Kits include mounting bolts and a 30mm post mount spacer for rear brake installation.
Avid Front 180mm/Rear 160mm Post Bracket Hardware Kit
$25.00 - $53.00
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
Avid Road/Elixir/DB/Level B1 (2020+) Disc Brake Pads
$25.00 - $30.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid Disc Brake Pads (Code)
$27.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid Matchmaker
$30.00
Clean up your control center with Avid's Matchmaker clamp. It combines the mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can drop some grams and keep your bar nice and tidy.
Avid Shorty Ultimate Brake Pads (w/cartridge)
$30.00 - $55.00
Bolt on Avid's Shorty Ultimate Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.
Avid Hydraulic Line Kit
$32.99 - $43.99
Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.
Avid BB5 MTN Cable Disc Brake Caliper
$35.00
Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g
Avid G2 CleanSweep Rotor
$43.99 - $50.00
Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.
Avid BB7 MTN Cable Disc Brake Caliper
$61.00
The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with long cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No
Black Ops V-Type Levers
$15.00
- Designed for linear pull & mechanical disc brakes - Aluminum construction - 2.5 finger - 22.2mm (7/8-inch) clamp - Left/Right: Right - Reach adjust and return spring - 88g each
Black Ops Hinged 2-Finger Lever
$16.39 - $39.99
- Hinged 2 finger lever - Forged alloy construction - 2 piece hinged clamp - Compatible with caliper and U-brake applications - Fits 22.2mm (7/8") handlebars - 166g pair
Black Ops VB1
$18.99 - $25.00
- Forged alloy V-brakes with 103mm arms - Brilliantly anodized in a variety of colors - Compatible with 70mm threaded brake pads - Front or rear - 21mm–35mm reach
FSA K-Force WE Disc Rotor
$77.70
- Two-piece rotor design with forged aluminum carrier - Double disc ground stainless steel rub ring - Countersunk rivets and disc screw mount points - Rounded edge shape - Mount Type: 6-Bolt
Hayes Caliper Rebuild Parts
$1.91 - $42.00
- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap
Hayes Disc Brake Pads
$8.00 - $26.00
- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip
Hayes Master Cylinder Body/Lever Parts
$10.50 - $42.00
- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts
Hayes Master Cylinder Guts Kit
$23.18 - $37.00
- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts
Hayes Caliper Rebuild Kit
$24.99
- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip
Hope 140 Rear or 160m Front 74mm to IS Disc Brake Adaptor
$20.00
· CNC machined in Barnoldswick, England · Includes mounting bolts · Adds 20mm of disc rotor diameter to dedicated IS calipers for use on post mount forks or frames (i.e a 160mm caliper would require the use of a 180mm rotor)
Jagwire Mountain Sport Brake Pads (Non-threaded)
$6.49 - $9.99
Compatible with cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability.
Jagwire Road Pro Inserts (SRAM/Shimano)
$8.49 - $21.99
Jagwire's Road Pro Inserts are a nice upgrade for Shimano and SRAM sidepull brakes. They're made of Jagwire's Pro Series compound in three versions for excellent stopping power in all conditions and with aluminum and carbon rims.
Jagwire Mountain Pro Inserts
$8.99 - $9.99
Jagwire's Mountain Pro Inserts are the correct replacement pads for Jagwire's Mountain Pro brake shoes (sold separately). These pads feature Jagwire's tried-and-true compound for excellent stopping power and durability.
Page 1 of 6 Next page