Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories

$159.99
- Waterproof (IPX3) - Elastic cord ontop and mesh side pockets - Removable and adjustable shoulder strap - Waterproof lining with roll top - Fastening: 4 straps at bottom - Compatible: MIK system
$155.95
The BKM-1.2 Hydraulic Brake Bleed Kit will bleed most models of mineral oil-based hydraulic bicycle disc brakes, including models made by Shimano®, Magura®, TRP®, Tektro®, Trick Stuff®, SRAM® DB8, Campagnolo®, Promax®, and Clarks®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance. The BKM-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, a bleed funnel, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case. Includes: -  Two 20 mL syringes -  Two hose assemblies with shutoff clips -  One hose assembly with integrated fitting for bleed nipples such as those found on Shimano® mineral oil brake systems -  One open-ended hose assembly -  Bleed funnel with stopper -  Two 10 mm/12 mm universal bleed blocks -  Two 11 mm bleed blocks -  Two adjustable syringe holders -  M4 x 0.7 adapters — SRAM® DB8, Trick Stuff®, Campagnolo® (x2) -  M5 x 0.8 adapter — Formula™ Cura™, Tektro®, Hayes® (x2) -  M6 x 0.75 adapter — Magura® -  M6 x 1.0 adapters — universal (x2) -  M6 x 1.0 adapter — Promax® -  M7 x 0.75 adapter — Shimano® -  Hose compression sleeve — universal -  Fluid disposal bag -  Set of spare O-rings and hose -  Replacement parts available -  Brake fluid not included NOTE: The BKM-1.2 is for mineral oil-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For brakes using DOT fluid use the Park Tool BKD-1.2 Hydraulic Brake Bleed Kit — DOT.
$140.00
16g CO2 Canister from Specialized.
$130.00
Bike to hike and back again has never been easier. Based on the iconic Fjallraven Verdag backpack, the Cave Pack has been shaped to nestle into the Coolcave like an arctic fox in its den. Lift the pack out of the Coolcave and sling it on your back using the padded shoulder straps. Equipped with a padded laptop compartment and large and small pockets, the Specialized/Fjällräven Cave Pack organizes and protects your most important belongings. - 20L capacity. - Easy-access pocket. - Fully padded laptop compartment. - Large front pocket. - Easy-carry handles. - Compatible with Coolcave pannier.
$127.95
The BKD-1.2 Hydraulic Brake Bleed Kit will bleed most models of DOT fluid-based hydraulic disc brakes, including models made by SRAM®, Formula®, Hayes®, and Hope®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance. The BKD-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case. Includes: - Two 20 mL syringes Two hose assemblies with shutoff clips - Two 10 mm/12 mm universal bleed blocks - Two 11 mm bleed blocks for Hayes® systems -  Two adjustable syringe holders -  M5 x 0.8 adapters— SRAM® (x2) -  M6 x 1.0 adapter— universal (x2) - Bleeding Edge-specific fitting — SRAM® -  Hose compression sleeve — universal -  Set of spare O-rings and hose -  Replacement parts available -  Brake fluid not included NOTE: The BKD-1.2 is for DOT fluid-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For mineral oil brake systems use the Park Tool BKM-1.2 Hydraulic Brake Bleed Kit — Mineral Oil.
$125.00
The Full Metal Fenders complement any road bike while providing full-wrap coverage. - Designed to fit road bikes that are difficult to install full-coverage fenders (includes hardware and add-on mounts for bikes without eyelets) - Safety release tabs keep wheels turning even if debris gets between the fender and tire - Made of anodized aluminum with laser graphics and an embossed alloy head badge - Sturdy rubber mudflaps shield riders behind from tire spray
$125.00
Bushings and spacer designed for use with Pedro's Headset and Bearing Press. - Includes ten precision-machined bushings in 6 sizes covering installation of all road, mountain, and BMX press-fit bottom brackets cups and bearings, plus a BB Bushing Spacer for enhanced flexibility, speed, and alignment - Bushings and spacer designed for use with Pedro's Headset & Bearing Press ensuring precise and accurate installation. Inner diameter of 18.4mm (14mm for 19-37 and 19-41) - EVA foam packaging insert keeps the bushings protected, organized, and ready for use
$120.00
The Tailwind aerodynamic panniers blend form with function, reducing drag and battery consumption by up to 6% when tested against competitors. Their low-bulk, clean-lined design delivers increased stability with a sleek aesthetic, creating a modern storage solution that lets you go further, faster, without compromising on what you carry. - 17 L capacity for all your gear, whether you're going downtown or way out of town. - Approx. dimensions (mm): 400 x 330 x 142mm (height/width/depth). - Klickfix mounting system lets you load the bags on and off your bike quickly for easy transitions, freeing up the top of the rack for additional carrying. - Compatible with all standard racks and all racks on Specialized bikes. - Sleek, water-resistant design sheds rain so your stuff stays dry when the weather gets nasty. - Unique right- and left-sided design delivers optimal aerodynamics for increased efficiency. - Internal laptop sleeve carries your computer snug and safe (laptops up to 17" screen). - 360-degree reflective graphics help drivers see you coming. - Freestanding shape for accessible loading and unloading.
$120.00
Take your ride up a notch with the Front Rack and Adventure Plate combo. These Specialized e-bike accessories give you an extra carrying platform to carry up to 10kg on the front end of your Turbo Vado, Como, or Tero. The front rack system for the bike was designed thoughtfully for elegant integration at the front of your bike, and it features meaningful compatibility for carrying what you want, how you want to. - Compatible with Turbo Vado, Como, and Tero. - Mounts to compatible bikes via the headtube interface. - Optional MIK compatibility when the plate is removed. - Seamless integration of front light mount. - Max. Load 10kg. - Retailer installation is recommended.
$118.00
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls
$115.49
- Waterproof (IPX3) - Welded construction - 100% tarpaulin - LED mounting possibility - 50L capacity - Strap mounting system - Aluminum buckle - 50L
$114.95
Topeak's MTX TrunkBag DX boasts an expandable main compartment to carry all the gear you need. It's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, taillight clip and top elastic straps. There are even reflective strips for safety. Plus, Topeak's ingenious MTX System makes it a snap to attach it to your Topeak MTX QuickTrack rack (sold separately). - Capacity 12.3 L / 750 ci - Compartments 1 Divided main compartmetn, two side zippered pockets, Multi-expanding top compartment - Added Features: Water bottle holder Shoulder strap Carrying handle Elastic top bungees 3M reflective strip Safety light clip Optional rain cover - Size (L x W x H): 36 x 25 x 21.5-29 cm / 14.2” x 9.8” x 8.5”~11.4” - Weight: 985 g / 2.17 lb
$109.95
The CatEye Padrone Digital Wireless shows your cadence and ride stats on a large, 3-row screen with up to four data displays, and allows you to sync the unit to a smartphone via Bluetooth.
$100.00
You need to carry more than water when you ride—but not much. The women's-specific Salida 8 dials you in with just enough room to fit just enough gear. An AirScape backpanel with a center channel offers supreme airflow and allows for dynamic body movement while keeping things close to your body for exceptional stability—even when things get rowdy. Shoulder straps with rolled edges create soft contact points when your pack is maxed out with gear and snacks. A U-zip main compartment opens wide for easy packing while a separate compartment holds an included 2.5-liter reservoir with direct-zip access. Store an extra layer or a map in the front pocket, or expand it to full capacity to fit a full face helmet for days that call for drops, jumps, and berms—oh my! VARIABLE HELMET CARRY - Includes Osprey's LidLock helmet carry for traditional helmets and front panel upper compression straps for full face helmets. RESERVOIR INCLUDED - Osprey Hydraulics LT 2.5L reservoir keeps you hydrated all day long and stores in a dedicated hydration compartment to protect pack contents from accidental spills. MOUNTAIN BIKE-FOCUSED FEATURES - Multi-pocketed tool organization and large bucket main compartment stores and protects all your essential gear. RIDE STABILITY - Our rolled, soft-edged harness contours to the upper shoulders to keep the pack close to your body and provide stability. FEATURES - Women's-specific fit and sizing - Included Osprey Hydraulics LT 2.5L reservoir by Hydrapak with direct-zip access - Magnetic sternum strap bite valve attachment - Dual upper side compression straps double as a full face helmet carry - Full front panel U-zip to main compartment and tool organization - Front panel shove-it pocket - LidLock helmet attachment - Blinker light attachment - Zippered hipbelt pockets - Zippered scratch-free, heat-embossed slash pocket AIRSCAPE SUSPENSION - Atilon foam framesheet enables dynamic body movement and evenly distrubutes load across the entire backpanel AIRSCAPE BACKPANEL - Mesh-covered extra deep ridged foam with center air channel allows maximum ventilation while keeping the load close to the body BIOSTRETCH HARNESS - Soft breathable spacermesh contact surfaces and die-cut foam ventilation - Rolled, soft-edged harness designed to contour the shoulder providing comfort and stability
$100.00
Specialized's Air Tool UHP Floor Pump makes it easy to dial in your fork and shock. With a cast aluminum base and an aluminum barrel, this sturdy floor pump reaches 350psi with ease. What's more, the micro air bleeder makes it easy to set the perfect pressure.
$100.00
Mate Specialized's Clip-On Clamp to a pair of aero extension bars and get time on your side. Their 22.2mm diameter is compatible with many standard aftermarket extensions, and with a one-bolt hinge system, they're simple to install.
$100.00
The Globe Front Rack bolts directly to the two mounts on the head tube to create a tough-as-nails platform for carrying whatever your heart desires. By mounting directly to the bike frame, heavy loads can be distributed with minimal effect on handling and stability. It's also compatible with the Globe Haul's front and rear pannier adapters, allowing you to carry 5+ full grocery bags. The T-channel rail material means you can bolt on additional accessories to the sides to further customize your setup. It also accepts MIK accessories, like the MIK adapter & Turbo Basket, for fast and secure installation. - Designed for frictionless compatibility with Haul ST and Haul LT. - MIK accessory-compatible. - T-channel rail construction. - 20kg (44lb) load capacity. 30cm length, 32cm width - Installation requires tools (not included).
$100.00
These fork-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low position maximizes handling stability, and this front option leaves the rear rack open for carrying passengers or even more cargo options. *Third-party panniers are not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two adapters (one for each side of the fork) and all required hardware. - 8kg (18lb) load capacity per side. - All tools required for assembly included with the purchase of the Haul ST or Haul LT bike
$100.00
These rear rack-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low mounting position opens the top rack platform for other accessories like the Rack Customization Kit or MIK adapter. *Third-party panniers not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and up to 2 pairs on Haul LT* - *Not compatible with Globe Pegs due to shared mounting location. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two pannier adapters (one for each side of the rack) and all required hardware. - 8kg (18lb) load capacity per side. - Additional tools required for rear installation (not included).
$100.00
The Handlebar Bag provides easy-access storage and works just as well on urban missions as on gravel escapes. Slide it onto the handlebar frame and fasten it with straps (note that the handlebar frame is not included and must be bought separately for the handlebar bag to function on a bike). Should you not want to leave it on your bike, it detaches easily and you can carry it with the removable shoulder strap. Elastic mesh pockets on the top and sides for items you want close at hand. Two attachment points on the front for tent poles, accessories, or the Specialized/Fjällräven Snack Bag. Note: The lid and seams are not sealed, but the lining is waterproof, so the bag offers protection from the rain. Part of the Specialized/Fjällräven series for urban rides and bikepacking adventures. - Weather-resistant, semi-rigid design in Vinylon F with lining in 100% recycled nylon. - One-hand easy-opening closure with an elastic cord loop. - Mesh pockets on top and sides and zippered inside pockets. - Reflective logo increases your visibility in low-light conditions. - Volume- approx. 10 L - Material- Vinylon F (100% vinylal)
$100.00
Versatile aluminum frame rack for transporting everything from postal packages to drybags or a tent on your bike. Attaches directly to the handlebar (fits handlebars with 31.8 mm diameter) and works with all types of bikes, except extreme downhill bikes. An anti-rotation guyline prevents the frame rack from tilting forward. Webbing straps to attach gear are not included. Part of the Specialized/Fjällräven series for urban rides and bikepacking adventures. - Light and strong aluminum construction. - Three under-rack accessory mounting holes for lights, cameras, etc. - Max load of 5kg. - Fits handlebars with 31.8 mm diameter and works with most types, including straight and drop models. - Compatible with Specialized's Future Shock suspension system. - Dimensions: 20 x 18 x 13 cm.
$99.95
The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. And for simple and durable storage, the components of this tool also nest inside of the handle. - Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle. - Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing. - Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required. - Works on 12mm thru axle bikes
$94.00
- Double-ended socket wrench with reversible ratchet mechanism - Long handle with soft non-slip rubber grip - 14 and 15mm sockets
$90.00
Back by popular demand, the Air Tool MTB Floor Pump is better than ever. Designed for low pressure, high volume tires, it provides precise pressure to ensure that your tires are set up for whatever the trail throws at you. - Oversized 3" (76mm) gauge has 0-40 PSI range for maximum resolution when filling large tires. - Massive 508cc volume aluminum barrel pushes enough air to seat tubeless tires. - Ergonomic Wing handle with pressure relief valve. - Auto selecting SwitchHitter II technology. - Includes spare rubber seal for head. - Max pressure: 40 PSI (2.7bar) - Volume-per-stroke: 508cc
$90.00
- 15kg carrying capacity. - Folding design allows it to fold down to size of a pizza box. - Lightweight aluminum, 13mm rails. - Can carry any side pannier with hooks that fit 13mm rails or larger. - Additional platform on top allows for an extra bag.
$90.00
The new Turbo Connect Display (TCD) is the best way to view data on your Turbo. It not only displays basic ride metrics (speed, cadence, power, battery level, and time), but it also lets you toggle between modes. Its design, meanwhile, is rugged and clean, and it has multiple mounting options for either road or mountain setups. As for the latest version of the Mission Control App, you’ll find that it now has more features and is even more intuitive to use. It lets you custom-tune nearly every aspect of the bike with ease, monitor your power usage, control your range, perform basic system diagnoses, and record/upload rides. - Monochrome LCD display (black/white). - Screen Size: Height (40mm), Width (35mm), Diagonal (52mm), Display (2 inches) - ANT+ & Bluetooth modules for easy communication. - Sits centrally on the handlebars at the stem and has either a twist-lock or an optional theft-resistant lock. - Twist-lock can be turned on the handlebars, while the display also fits others popular mount options. - Protection standard IPX7 (suitable for splashes, rain, or snow).
$89.99
Bike safety reinvented, Vya Pro Smart Lights provide an uncompromising powerful SafePulse beam with convenience commuters love. Smart auto-on/off sensors are a true game changer – start riding and the light turns on automatically and will shut itself off after the ride, with a delay built in to remain on at stoplights. Whereas Vya taillights will always pulse for effective rear visibility, the smart headlight senses ambient light and knows to pulse in the daytime but remain steady at night – automatically adjusting to the safest riding mode possible. Attaching Vya is effortless with a simple clockwise 1/4 turn into the mount locking the light in place and activating the auto-on feature. When it comes time to recharge, remove Vya from the mount in seconds and insert the integrated USB paddle directly into a computer or USB power outlet – no cables keeps recharging simple and efficient. For the busy commuter that wants premium visibility but a lighting setup that removes in seconds, the smart Vya Pro Commuter Combo is the perfect solution. Features - 200 Lumen Headlight (250 SafePulse) & 100 Lumen Taillight optimized for maximum visibility day and night - Smart sensor technology senses motion and automatically turns lights on when inserted into mount; Auto-off when bike is parked removed from mount - SafePulse beam pattern scientifically designed to enhance a passing driver’s ability to judge the cyclist’s distance and direction of travel without the risks associated with flashing lights - Powerful custom optics to provide a punchy beam visible over 2KM in daylight - USB Mount Receptor allows lights to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock; lights will not turn on when removed from mount and slipped into a pocket or bag - Easy direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) Headlight Specifications - Lumens: 200 (high), 250 (SafePulse) - Runtime: 120 min (high), 360 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min
$89.95
MTX QuickTrack compatible TrunkBag featuring a divided main compartment constructed with Topeak's unique process of combining rigid panels and flexible fabric for structure and water repellency. Features two mesh side compartments for extra capacity and rear water bottle holder lets you carry more water on extended trips. - Attachments: 1 divided main compartment, two mesh side pockets - Capacity: 8L / 480 ci - Added Features: Water bottle holder Shoulder strap Carrying handle Elastic top bungees 3M reflective strip Safety light clip Optional rain cover - Size (L x W x H): 35 x 21 x 19 cm / 14.2” x 8.3” x 7.5” - Weight: 870 g / 1.92 lb
$85.00
- Lightweight minimalist fender uses a carbon fiber shaft, polycarbonate guard and forged alloy mount - Fender mounts to quick release, is easy to adjust and makes no noise - Special underside profile effectively disperses the worst of the water and dirt away from the rider - Accommodates up to 25mm tire
$84.99
The Right Combo for Proper Security This lock is easy to use, equipped with two-component molded digit tumblers that ensure the digits are permanently visible. The complete plastic coating of the lock body and the distinctive textile tube of the chain prevent damage to the bike. - 8mm chain with fabric sleeve to prevent damage to the bicycle's paint - The chain is made of specially hardened steel - Two-component number tumblers guarantee long-term readability of the digits - Individually configurable code